Difference between revisions of "LPIC-2 Objectives V4"

Revision as of 14:45, 4 December 2014 (view source) GMatthewRice (Talk | contribs) (→‎212.5 OpenVPN (weight: 2)) ← Older edit		Revision as of 14:46, 4 December 2014 (view source) GMatthewRice (Talk | contribs) (→‎202.3 Alternate Bootloaders (weight: 2)) Newer edit →
Line 470:		Line 470:
	* pxelinux.0		* pxelinux.0
−	* pxelinux.cfg/*	+	* pxelinux.cfg/
	<br/>		<br/>

---

Revision as of 14:46, 4 December 2014

Overview of Tasks

These are required exams for LPI certification Level 2. It covers advanced skills for the Linux professional that are common across all distributions of Linux. Also, LPIC-1 must be obtained in order to receive the certification. Exams may be taken in any order but all of the requirements must be met.

To pass LPIC-2, the candidate should be able to:

• Administer a small to medium-sized site.
• Plan, implement, maintain, keep consistent, secure, and troubleshoot a small mixed (MS, Linux) network, including a:
  • LAN server (Samba, NFS, DNS, DHCP, client management).
  • Internet Gateway (firewall, VPN, SSH, web cache/proxy, mail).
  • Internet Server (web server and reverse proxy, FTP server).
• Supervise assistants.
• Advise management on automation and purchases.

Version Information

These objectives are version 4.0.0. This version is to go live on Nov 1, 2013.

This is also a summary and detailed information on the changes from version 3.5.x to 4.0.0 of the objectives.

The version 3.x of the LPIC-2 Objectives are still online.

Exams

In order to be certified LPIC-2, the candidate must pass both the 201 and 202 exams and be a holder of an active LPIC-1 certification.

• 201
• 202

Addenda

Clarification Addendum (Nov 1st, 2013)

• changed htgroup to AuthGroupFile and AuthUserFile

Version Update (Nov 1st, 2013)

• updated to version 4.0.0

Translations of Objectives

The following translations of the objectives are available on this wiki:

• English

• Spanish

• French

• German

Objectives: Exam 201

Topic 200: Capacity Planning

200.1 Measure and Troubleshoot Resource Usage (weight: 6)

Weight	6
Description	Candidates should be able to measure hardware resource and network bandwidth, identify and troubleshoot resource problems.

Key Knowledge Areas:

• Measure CPU usage.

• Measure memory usage.

• Measure disk I/O.

• Measure network I/O.

• Measure firewalling and routing throughput.

• Map client bandwidth usage.

• Match / correlate system symptoms with likely problems.

• Estimate throughput and identify bottlenecks in a system including networking.

The following is a partial list of the used files, terms and utilities:

• iostat

• vmstat

• netstat

• pstree, ps

• w

• lsof

• top

• uptime

• sar

• swap

• processes blocked on I/O

• blocks in

• blocks out

200.2 Predict Future Resource Needs (weight: 2)

Weight	2
Description	Candidates should be able to monitor resource usage to predict future resource needs.

Key Knowledge Areas:

• Use collectd to monitor IT infrastructure usage.

• Predict capacity break point of a configuration.

• Observe growth rate of capacity usage.

• Graph the trend of capacity usage.

• Awareness of monitoring solutions such as Nagios, MRTG and Cacti

The following is a partial list of the used files, terms and utilities:

• diagnose

• predict growth

• resource exhaustion

Topic 201: Linux Kernel

201.1 Kernel components (weight: 2)

Weight	2
Description	Candidates should be able to utilise kernel components that are necessary to specific hardware, hardware drivers, system resources and requirements. This objective includes implementing different types of kernel images, understanding stable and longterm kernels and patches, as well as using kernel modules.

Key Knowledge Areas:

• Kernel 2.6.x documentation

• Kernel 3.x documentation

The following is a partial list of the used files, terms and utilities:

• /usr/src/linux

• /usr/src/linux/Documentation

• zImage

• bzImage

201.2 Compiling a Linux kernel (weight: 3)

Weight	3
Description	Candidates should be able to properly configure a kernel to include or disable specific features of the Linux kernel as necessary. This objective includes compiling and recompiling the Linux kernel as needed, updating and noting changes in a new kernel, creating an initrd image and installing new kernels.

Key Knowledge Areas:

• /usr/src/linux/

• Kernel Makefiles

• Kernel 2.6.x/3.x make targets

• Customize the current kernel configuration.

• Build a new kernel and appropriate kernel modules.

• Install a new kernel and any modules.

• Ensure that the boot manager can locate the new kernel and associated files.

• Module configuration files

• Awareness of dracut

The following is a partial list of the used files, terms and utilities:

• mkinitrd

• mkinitramfs

• make

• make targets (all, config, xconfig, menuconfig, gconfig, oldconfig, mrproper, zImage, bzImage, modules, modules_install, rpm-pkg, binrpm-pkg, deb-pkg)

• gzip

• bzip2

• module tools

• /usr/src/linux/.config

• /lib/modules/kernel-version/*

• depmod

201.3 Kernel runtime management and troubleshooting (weight: 4)

Weight	4
Description	Candidates should be able to manage and/or query a 2.6.x or 3.x kernel and its loadable modules. Candidates should be able to identify and correct common boot and run time issues. Candidates should understand device detection and management using udev. This objective includes troubleshooting udev rules.

Key Knowledge Areas:

• Use command-line utilities to get information about the currently running kernel and kernel modules.

• Manually load and unload kernel modules.

• Determine when modules can be unloaded.

• Determine what parameters a module accepts.

• Configure the system to load modules by names other than their file name.

• /proc filesystem

• Content of /, /boot , and /lib/modules

• Tools and utilities to analyse information about the available hardware

• udev rules

The following is a partial list of the used files, terms and utilities:

• /lib/modules/kernel-version/modules.dep

• module configuration files in /etc

• /proc/sys/kernel/

• /sbin/depmod

• /sbin/rmmod

• /sbin/modinfo

• /bin/dmesg

• /sbin/lspci

• /usr/bin/lsdev

• /sbin/lsmod

• /sbin/modprobe

• /sbin/insmod

• /bin/uname

• /usr/bin/lsusb

• /etc/sysctl.conf, /etc/sysctl.d/

• /sbin/sysctl

• udevmonitor

• udevadm monitor

• /etc/udev

Topic 202: System Startup

202.1 Customising SysV-init system startup (weight: 3)

Weight	3
Description	Candidates should be able to query and modify the behaviour of system services at various run levels. A thorough understanding of the init structure and boot process is required. This objective includes interacting with run levels.

Key Knowledge Areas:

• Linux Standard Base Specification (LSB)

• SysV init environment

The following is a partial list of the used files, terms and utilities:

• /etc/inittab

• /etc/init.d/

• /etc/rc.d/

• chkconfig

• update-rc.d

• init and telinit

202.2 System recovery (weight: 4)

Weight	4
Description	Candidates should be able to properly manipulate a Linux system during both the boot process and during recovery mode. This objective includes using both the init utility and init-related kernel options. Candidates should be able to determine the cause of errors in loading and usage of bootloaders. GRUB version 2 and GRUB Legacy are the bootloaders of interest.

Key Knowledge Areas:

• GRUB version 2 and Legacy

• grub shell

• boot loader start and hand off to kernel

• kernel loading

• hardware initialisation and setup

• daemon/service initialisation and setup

• Know the different boot loader install locations on a hard disk or removable device

• Overwriting standard boot loader options and using boot loader shells

• Awareness of UEFI

The following is a partial list of the used files, terms and utilities:

• mount

• fsck

• inittab, telinit and init with SysV init

• The contents of /boot/ and /boot/grub/

• GRUB

• grub-install

• initrd, initramfs

• Master boot record

202.3 Alternate Bootloaders (weight: 2)

Weight	2
Description	Candidates should be aware of other bootloaders and their major features.

Key Knowledge Areas:

• LILO

• SYSLINUX, ISOLINUX, PXELINUX

• Understanding of PXE

The following is a partial list of the used files, terms and utilities:

• lilo, /etc/lilo.conf

• syslinux

• extlinux

• isolinux.bin

• isolinux.cfg

• pxelinux.0

• pxelinux.cfg/

Topic 203: Filesystem and Devices

203.1 Operating the Linux filesystem (weight: 4)

Weight	4
Description	Candidates should be able to properly configure and navigate the standard Linux filesystem. This objective includes configuring and mounting various filesystem types.

Key Knowledge Areas:

• The concept of the fstab configuration

• Tools and utilities for handling SWAP partitions and files

• Use of UUIDs for identifying and mounting file systems

The following is a partial list of the used files, terms and utilities:

• /etc/fstab

• /etc/mtab

• /proc/mounts

• mount and umount

• blkid

• sync

• swapon

• swapoff

203.2 Maintaining a Linux filesystem (weight: 3)

Weight	3
Description	Candidates should be able to properly maintain a Linux filesystem using system utilities. This objective includes manipulating standard filesystems and monitoring SMART devices.

Key Knowledge Areas:

• Tools and utilities to manipulate and ext2, ext3 and ext4

• Tools and utilities to manipulate xfs

• Awareness of Btrfs

The following is a partial list of the used files, terms and utilities:

• fsck (fsck.*)

• mkfs (mkfs.*)

• dumpe2fs, xfsdump, xfsrestore

• debugfs

• tune2fs

• mkswap

• xfs_info, xfs_check and xfs_repair

• smartd, smartctl

203.3 Creating and configuring filesystem options (weight: 2)

Weight	2
Description	Candidates should be able to configure automount filesystems using AutoFS. This objective includes configuring automount for network and device filesystems. Also included is creating filesystems for devices such as CD-ROMs and a basic feature knowledge of encrypted filesystems.

Key Knowledge Areas:

• autofs configuration files

• UDF and ISO9660 tools and utilities

• awareness of CD-ROM filesystems (UDF, ISO9660, HFS)

• awareness of CD-ROM filesystem extensions (Joliet, Rock Ridge, El Torito)

• basic feature knowledge of encrypted filesystems

The following is a partial list of the used files, terms and utilities:

• /etc/auto.master

• /etc/auto.[dir]

• mkisofs

Topic 204: Advanced Storage Device Administration

204.1 Configuring RAID (weight: 3)

Weight	3
Description	Candidates should be able to configure and implement software RAID. This objective includes using and configuring RAID 0, 1 and 5.

Key Knowledge Areas:

• Software RAID configuration files and utilities

The following is a partial list of the used files, terms and utilities:

• mdadm.conf

• mdadm

• /proc/mdstat

• partition type 0xFD

204.2 Adjusting Storage Device Access (weight: 2)

Weight	2
Description	Candidates should be able to configure kernel options to support various drives. This objective includes software tools to view & modify hard disk settings including iSCSI devices.

Key Knowledge Areas:

• Tools and utilities to configure DMA for IDE devices including ATAPI and SATA

• Tools and utilities to manipulate or analyse system resources (e.g. interrupts)

• Awareness of sdparm command and its uses

• Tools and utilities for iSCSI

The following is a partial list of the used files, terms and utilities:

• hdparm, sdparm

• tune2fs

• sysctl

• /dev/hd*, /dev/sd*

• iscsiadm, scsi_id, iscsid and iscsid.conf

• WWID, WWN, LUN numbers

204.3 Logical Volume Manager (weight: 3)

Weight	3
Description	Candidates should be able to create and remove logical volumes, volume groups, and physical volumes. This objective includes snapshots and resizing logical volumes.

Key Knowledge Areas:

• Tools in the LVM suite

• Resizing, renaming, creating, and removing logical volumes, volume groups, and physical volumes

• Creating and maintaining snapshots

• Activating volume groups

The following is a partial list of the used files, terms and utilities:

• /sbin/pv*

• /sbin/lv*

• /sbin/vg*

• mount

• /dev/mapper/

Topic 205: Networking Configuration

205.1 Basic networking configuration (weight: 3)

Weight	3
Description	Candidates should be able to configure a network device to be able to connect to a local, wired or wireless, and a wide-area network. This objective includes being able to communicate between various subnets within a single network including both IPv4 and IPv6 networks.

Key Knowledge Areas:

• Utilities to configure and manipulate ethernet network interfaces

• Configuring basic access to wireless networks with iw, iwconfig and iwlist

The following is a partial list of the used files, terms and utilities:

• /sbin/route

• /sbin/ifconfig

• /sbin/ip

• /usr/sbin/arp

• /sbin/iwconfig

• /sbin/iwlist

205.2 Advanced Network Configuration (weight: 4)

Weight	4
Description	Candidates should be able to configure a network device to implement various network authentication schemes. This objective includes configuring a multi-homed network device and resolving communication problems.

Key Knowledge Areas:

• Utilities to manipulate routing tables

• Utilities to configure and manipulate ethernet network interfaces

• Utilities to analyse the status of the network devices

• Utilities to monitor and analyse the TCP/IP traffic

The following is a partial list of the used files, terms and utilities:

• /sbin/route

• /sbin/ifconfig

• /bin/netstat

• /bin/ping

• /usr/sbin/arp

• /usr/sbin/tcpdump

• /usr/sbin/lsof

• /usr/bin/nc

• /sbin/ip

• nmap

205.3 Troubleshooting network issues (weight: 4)

Weight	4
Description	Candidates should be able to identify and correct common network setup issues, to include knowledge of locations for basic configuration files and commands.

Key Knowledge Areas:

• Location and content of access restriction files

• Utilities to configure and manipulate ethernet network interfaces

• Utilities to manage routing tables

• Utilities to list network states.

• Utilities to gain information about the network configuration

• Methods of information about the recognised and used hardware devices

• System initialisation files and their contents (SysV init process)

• Awareness of NetworkManager and its impact on network configuration

The following is a partial list of the used files, terms and utilities:

• /sbin/ifconfig

• /sbin/route

• /bin/netstat

• /etc/network/, /etc/sysconfig/network-scripts/

• System log files such as /var/log/syslog & /var/log/messages

• /bin/ping

• /etc/resolv.conf

• /etc/hosts

• /etc/hostname, /etc/HOSTNAME

• /bin/hostname

• /usr/sbin/traceroute

• /bin/dmesg

• /etc/hosts.allow, /etc/hosts.deny

Topic 206: System Maintenance

206.1 Make and install programs from source (weight: 2)

Weight	2
Description	Candidates should be able to build and install an executable program from source. This objective includes being able to unpack a file of sources.

Key Knowledge Areas:

• Unpack source code using common compression and archive utilities.

• Understand basics of invoking make to compile programs.

• Apply parameters to a configure script.

• Know where sources are stored by default.

The following is a partial list of the used files, terms and utilities:

• /usr/src/

• gunzip

• gzip

• bzip2

• tar

• configure

• make

• uname

• install

• patch

206.2 Backup operations (weight: 3)

Weight	3
Description	Candidates should be able to use system tools to back up important system data.

Key Knowledge Areas:

• Knowledge about directories that have to be include in backups

• Awareness of network backup solutions such as Amanda, Bacula and BackupPC

• Knowledge of the benefits and drawbacks of tapes, CDR, disk or other backup media

• Perform partial and manual backups.

• Verify the integrity of backup files.

• Partially or fully restore backups.

The following is a partial list of the used files, terms and utilities:

• /bin/sh

• dd

• tar

• /dev/st* and /dev/nst*

• mt

• rsync

206.3 Notify users on system-related issues (weight: 1)

Weight	1
Description	Candidates should be able to notify the users about current issues related to the system.

Key Knowledge Areas:

• Automate communication with users through logon messages.

• Inform active users of system maintenance

The following is a partial list of the used files, terms and utilities:

• /etc/issue

• /etc/issue.net

• /etc/motd

• wall

• /sbin/shutdown

Objectives: Exam 202

Topic 207: Domain Name Server

207.1 Basic DNS server configuration (weight: 3)

Weight	3
Description	Candidates should be able to configure BIND to function as a caching-only DNS server. This objective includes the ability to managing a running server and configuring logging.

Key Knowledge Areas:

• BIND 9.x configuration files, terms and utilities

• Defining the location of the BIND zone files in BIND configuration files

• Reloading modified configuration and zone files

• Awareness of dnsmasq, djbdns and PowerDNS as alternate name servers

The following is a partial list of the used files, terms and utilities:

• /etc/named.conf

• /var/named/

• /usr/sbin/rndc

• kill

• host

• dig

207.2 Create and maintain DNS zones (weight: 3)

Weight	3
Description	Candidates should be able to create a zone file for a forward or reverse zone and hints for root level servers. This objective includes setting appropriate values for records, adding hosts in zones and adding zones to the DNS. A candidate should also be able to delegate zones to another DNS server.

Key Knowledge Areas:

• BIND 9 configuration files, terms and utilities

• Utilities to request information from the DNS server

• Layout, content and file location of the BIND zone files

• Various methods to add a new host in the zone files, including reverse zones

The following is a partial list of the used files, terms and utilities:

• /var/named/

• zone file syntax

• resource record formats

• dig

• nslookup

• host

207.3 Securing a DNS server (weight: 2)

Weight	2
Description	Candidates should be able to configure a DNS server to run as a non-root user and run in a chroot jail. This objective includes secure exchange of data between DNS servers.

Key Knowledge Areas:

• BIND 9 configuration files

• Configuring BIND to run in a chroot jail

• Split configuration of BIND using the forwarders statement

• Configuring and using transaction signatures (TSIG)

• Awareness of DNSSEC and basic tools

The following is a partial list of the used files, terms and utilities:

• /etc/named.conf

• /etc/passwd

• DNSSEC

• dnssec-keygen

• dnssec-signzone

Topic 208: Web Services

208.1 Basic Apache configuration (weight: 4)

Weight

4

Description

Candidates should be able to install and configure a web server. This objective includes monitoring the server's load and performance, restricting client user access, configuring support for scripting languages as modules and setting up client user authentication. Also included is configuring server options to restrict usage of resources. Candidates should be able to configure a web server to use virtual hosts and customise file access.

Key Knowledge Areas:

• Apache 2.x configuration files, terms and utilities

• Apache log files configuration and content

• Access restriction methods and files

• mod_perl and PHP configuration

• Client user authentication files and utilities

• Configuration of maximum requests, minimum and maximum servers and clients

• Apache 2.x virtual host implementation (with and without dedicated IP addresses)

• Using redirect statements in Apache's configuration files to customise file access

The following is a partial list of the used files, terms and utilities:

• access logs and error logs

• .htaccess

• httpd.conf

• mod_auth

• htpasswd

• AuthUserFile, AuthGroupFile

• apache2ctl

• httpd

208.2 Apache configuration for HTTPS (weight: 3)

Weight	3
Description	Candidates should be able to configure a web server to provide HTTPS.

Key Knowledge Areas:

• SSL configuration files, tools and utilities

• Ability to generate a server private key and CSR for a commercial CA

• Ability to generate a self-signed Certificate from private CA

• Ability to install the key and Certificate

• Awareness of the issues with Virtual Hosting and use of SSL

• Security issues in SSL use

The following is a partial list of the used files, terms and utilities:

• Apache2 configuration files

• /etc/ssl/, /etc/pki/

• openssl, CA.pl

• SSLEngine, SSLCertificateKeyFile, SSLCertificateFile, SSLCertificateChainFile

• SSLCACertificateFile, SSLCACertificatePath

• SSLProtocol, SSLCipherSuite, ServerTokens, ServerSignature, TraceEnable

208.3 Implementing Squid as a caching proxy (weight: 2)

Weight	2
Description	Candidates should be able to install and configure a proxy server, including access policies, authentication and resource usage.

Key Knowledge Areas:

• Squid 3.x configuration files, terms and utilities

• Access restriction methods

• Client user authentication methods

• Layout and content of ACL in the Squid configuration files

The following is a partial list of the used files, terms and utilities:

• squid.conf

• acl

• http_access

208.4 Implementing Nginx as a web server and a reverse proxy (weight: 2)

Weight	2
Description	Candidates should be able to install and configure a reverse proxy server, Nginx. Basic configuration of Nginx as a HTTP server is included.

Key Knowledge Areas:

• Nginx

• Reverse Proxy

• Basic Web Server

The following is a partial list of the used files, terms and utilities:

• /etc/nginx/

• nginx

Topic 209: File Sharing

209.1 Samba Server Configuration (weight: 5)

Weight	5
Description	Candidates should be able to set up a SAMBA server for various clients. This objective includes setting up Samba for login clients and setting up the workgroup in which a server participates and defining shared directories and printers. Also covered is a configuring a Linux client to use a Samba server. Troubleshooting installations is also tested.

Key Knowledge Areas:

• Samba version 3 documentation

• Samba configuration files

• Samba tools and utilities

• Mounting Samba shares on Linux

• Samba daemons

• Mapping Windows user names to Linux user names

• User-Level and Share-Level security

The following is a partial list of the used files, terms and utilities:

• smbd, nmbd

• smbstatus, testparm, smbpasswd, nmblookup

• smbclient

• net

• /etc/smb/

• /var/log/samba/

209.2 NFS Server Configuration (weight: 3)

Weight	3
Description	Candidates should be able to export filesystems using NFS. This objective includes access restrictions, mounting an NFS filesystem on a client and securing NFS.

Key Knowledge Areas:

• NFS version 3 configuration files

• NFS tools and utilities

• Access restrictions to certain hosts and/or subnets

• Mount options on server and client

• TCP Wrappers

• Awareness of NFSv4

The following is a partial list of the used files, terms and utilities:

• /etc/exports

• exportfs

• showmount

• nfsstat

• /proc/mounts

• /etc/fstab

• rpcinfo

• mountd

• portmapper

Topic 210: Network Client Management

210.1 DHCP configuration (weight: 2)

Weight	2
Description	Candidates should be able to configure a DHCP server. This objective includes setting default and per client options, adding static hosts and BOOTP hosts. Also included is configuring a DHCP relay agent and maintaining the DHCP server.

Key Knowledge Areas:

• DHCP configuration files, terms and utilities

• Subnet and dynamically-allocated range setup

The following is a partial list of the used files, terms and utilities:

• dhcpd.conf

• dhcpd.leases

• /var/log/daemon.log and /var/log/messages

• arp

• dhcpd

210.2 PAM authentication (weight: 3)

Weight	3
Description	The candidate should be able to configure PAM to support authentication using various available methods.

Key Knowledge Areas:

• PAM configuration files, terms and utilities

• passwd and shadow passwords

The following is a partial list of the used files, terms and utilities:

• /etc/pam.d/

• pam.conf

• nsswitch.conf

• pam_unix, pam_cracklib, pam_limits, pam_listfile

210.3 LDAP client usage (weight: 2)

Weight	2
Description	Candidates should be able to perform queries and updates to an LDAP server. Also included is importing and adding items, as well as adding and managing users.

Key Knowledge Areas:

• LDAP utilities for data management and queries

• Change user passwords

• Querying the LDAP directory

The following is a partial list of the used files, terms and utilities:

• ldapsearch

• ldappasswd

• ldapadd

• ldapdelete

210.4 Configuring an OpenLDAP server (weight: 4)

Weight	4
Description	Candidates should be able to configure a basic OpenLDAP server including knowledge of LDIF format and essential access controls. An understanding of the role of SSSD in authentication and identity management is included.

Key Knowledge Areas:

• OpenLDAP

• Access Control

• Distinguished Names

• Changetype Operations

• Schemas and Whitepages

• Directories

• Object IDs, Attributes and Classes

• Awareness of System Security Services Daemon (SSSD)

The following is a partial list of the used files, terms and utilities:

• slapd

• slapd.conf

• LDIF

• slapadd

• slapcat

• slapindex

• /var/lib/ldap/

• loglevel

Topic 211: E-Mail Services

211.1 Using e-mail servers (weight: 4)

Weight	4
Description	Candidates should be able to manage an e-mail server, including the configuration of e-mail aliases, e-mail quotas and virtual e-mail domains. This objective includes configuring internal e-mail relays and monitoring e-mail servers.

Key Knowledge Areas:

• Configuration files for postfix

• Basic knowledge of the SMTP protocol

• Awareness of sendmail and exim

The following is a partial list of the used files, terms and utilities:

• Configuration files and commands for postfix

• /etc/postfix/

• /var/spool/postfix/

• sendmail emulation layer commands

• /etc/aliases

• mail-related logs in /var/log/

211.2 Managing Local E-Mail Delivery (weight: 2)

Weight	2
Description	Candidates should be able to implement client e-mail management software to filter, sort and monitor incoming user e-mail.

Key Knowledge Areas:

• procmail configuration files, tools and utilities

• Usage of procmail on both server and client side

The following is a partial list of the used files, terms and utilities:

• ~/.procmailrc

• /etc/procmailrc

• procmail

• mbox and Maildir formats

211.3 Managing Remote E-Mail Delivery (weight: 2)

Weight	2
Description	Candidates should be able to install and configure POP and IMAP daemons.

Key Knowledge Areas:

• Courier IMAP and Courier POP configuration

• Dovecot configuration

The following is a partial list of the used files, terms and utilities:

• /etc/courier/

• dovecot.conf

Topic 212: System Security

212.1 Configuring a router (weight: 3)

Weight	3
Description	Candidates should be able to configure a system to perform network address translation (NAT, IP masquerading) and state its significance in protecting a network. This objective includes configuring port redirection, managing filter rules and averting attacks.

Key Knowledge Areas:

• iptables configuration files, tools and utilities

• Tools, commands and utilities to manage routing tables.

• Private address ranges

• Port redirection and IP forwarding

• List and write filtering and rules that accept or block datagrams based on source or destination protocol, port and address

• Save and reload filtering configurations

• Awareness of ip6tables and filtering

The following is a partial list of the used files, terms and utilities:

• /proc/sys/net/ipv4/

• /etc/services

• iptables

212.2 Managing FTP servers (weight: 2)

Weight	2
Description	Candidates should be able to configure an FTP server for anonymous downloads and uploads. This objective includes precautions to be taken if anonymous uploads are permitted and configuring user access.

Key Knowledge Areas:

• Configuration files, tools and utilities for Pure-FTPd and vsftpd

• Awareness of ProFTPd

• Understanding of passive vs. active FTP connections

The following is a partial list of the used files, terms and utilities:

• vsftpd.conf

• important Pure-FTPd command line options

212.3 Secure shell (SSH) (weight: 4)

Weight	4
Description	Candidates should be able to configure and secure an SSH daemon. This objective includes managing keys and configuring SSH for users. Candidates should also be able to forward an application protocol over SSH and manage the SSH login.

Key Knowledge Areas:

• OpenSSH configuration files, tools and utilities

• Login restrictions for the superuser and the normal users

• Managing and using server and client keys to login with and without password

• Usage of multiple connections from multiple hosts to guard against loss of connection to remote host following configuration changes

The following is a partial list of the used files, terms and utilities:

• ssh

• sshd

• /etc/ssh/sshd_config

• /etc/ssh/

• Private and public key files

• PermitRootLogin, PubKeyAuthentication, AllowUsers, PasswordAuthentication, Protocol

212.4 Security tasks (weight: 3)

Weight	3
Description	Candidates should be able to receive security alerts from various sources, install, configure and run intrusion detection systems and apply security patches and bugfixes.

Key Knowledge Areas:

• Tools and utilities to scan and test ports on a server

• Locations and organisations that report security alerts as Bugtraq, CERT or other sources

• Tools and utilities to implement an intrusion detection system (IDS)

• Awareness of OpenVAS and Snort

The following is a partial list of the used files, terms and utilities:

• telnet

• nmap

• fail2ban

• nc

• iptables

212.5 OpenVPN (weight: 2)

Weight	2
Description	Candidates should be able to configure a VPN (Virtual Private Network) and create secure point-to-point or site-to-site connections.

Key Knowledge Areas:

• OpenVPN

The following is a partial list of the used files, terms and utilities:

• /etc/openvpn/

• openvpn

Future Change Considerations

Future changes to the objective will/may include:

• EFI shell, gdisk, parted not included. More appropriate in LPIC-1 update.

• lighttpd would have been too much coverage of web services. Perhaps reduce Apache next revision to make room.

• host level IDS (tripwire, AIDE, etc) to be covered in future LPIC-1.

• sieve and maildrop to be considered in a future update.

• SAN, AoE, and FCoE to be considered in a future update.

• encrypted file systems are covered in-depth in LPI-303 exam.

• mention of DANE