LPIC-2 201 v4 0

Introduction

This exam is part of the LPIC-2 program.

Objectives: Exam 201

Topic 200: Capacity Planning

200.1 Measure and Troubleshoot Resource Usage (weight: 6)

Weight	6
Description	Candidates should be able to measure hardware resource and network bandwidth, identify and troubleshoot resource problems.

Key Knowledge Areas:

• Measure CPU usage.

• Measure memory usage.

• Measure disk I/O.

• Measure network I/O.

• Measure firewalling and routing throughput.

• Map client bandwidth usage.

• Match / correlate system symptoms with likely problems.

• Estimate throughput and identify bottlenecks in a system including networking.

The following is a partial list of the used files, terms and utilities:

• iostat

• vmstat

• netstat

• pstree, ps

• w

• lsof

• top

• uptime

• sar

• swap

• processes blocked on I/O

• blocks in

• blocks out

200.2 Predict Future Resource Needs (weight: 2)

Weight	2
Description	Candidates should be able to monitor resource usage to predict future resource needs.

Key Knowledge Areas:

• Use collectd to monitor IT infrastructure usage.

• Predict capacity break point of a configuration.

• Observe growth rate of capacity usage.

• Graph the trend of capacity usage.

• Awareness of monitoring solutions such as Nagios, MRTG and Cacti

The following is a partial list of the used files, terms and utilities:

• diagnose

• predict growth

• resource exhaustion

Topic 201: Linux Kernel

201.1 Kernel components (weight: 2)

Weight	2
Description	Candidates should be able to utilise kernel components that are necessary to specific hardware, hardware drivers, system resources and requirements. This objective includes implementing different types of kernel images, understanding stable and longterm kernels and patches, as well as using kernel modules.

Key Knowledge Areas:

• Kernel 2.6.x documentation

• Kernel 3.x documentation

The following is a partial list of the used files, terms and utilities:

• /usr/src/linux

• /usr/src/linux/Documentation

• zImage

• bzImage

201.2 Compiling a Linux kernel (weight: 3)

Weight	3
Description	Candidates should be able to properly configure a kernel to include or disable specific features of the Linux kernel as necessary. This objective includes compiling and recompiling the Linux kernel as needed, updating and noting changes in a new kernel, creating an initrd image and installing new kernels.

Key Knowledge Areas:

• /usr/src/linux/

• Kernel Makefiles

• Kernel 2.6.x/3.x make targets

• Customize the current kernel configuration.

• Build a new kernel and appropriate kernel modules.

• Install a new kernel and any modules.

• Ensure that the boot manager can locate the new kernel and associated files.

• Module configuration files

• Awareness of dracut

The following is a partial list of the used files, terms and utilities:

• mkinitrd

• mkinitramfs

• make

• make targets (all, config, xconfig, menuconfig, gconfig, oldconfig, mrproper, zImage, bzImage, modules, modules_install, rpm-pkg, binrpm-pkg, deb-pkg)

• gzip

• bzip2

• module tools

• /usr/src/linux/.config

• /lib/modules/kernel-version/*

• depmod

201.3 Kernel runtime management and troubleshooting (weight: 4)

Weight	4
Description	Candidates should be able to manage and/or query a 2.6.x or 3.x kernel and its loadable modules. Candidates should be able to identify and correct common boot and run time issues. Candidates should understand device detection and management using udev. This objective includes troubleshooting udev rules.

Key Knowledge Areas:

• Use command-line utilities to get information about the currently running kernel and kernel modules.

• Manually load and unload kernel modules.

• Determine when modules can be unloaded.

• Determine what parameters a module accepts.

• Configure the system to load modules by names other than their file name.

• /proc filesystem

• Content of /, /boot , and /lib/modules

• Tools and utilities to analyse information about the available hardware

• udev rules

The following is a partial list of the used files, terms and utilities:

• /lib/modules/kernel-version/modules.dep

• module configuration files in /etc

• /proc/sys/kernel/

• /sbin/depmod

• /sbin/rmmod

• /sbin/modinfo

• /bin/dmesg

• /sbin/lspci

• /usr/bin/lsdev

• /sbin/lsmod

• /sbin/modprobe

• /sbin/insmod

• /bin/uname

• /usr/bin/lsusb

• /etc/sysctl.conf, /etc/sysctl.d/

• /sbin/sysctl

• udevmonitor

• udevadm monitor

• /etc/udev

Topic 202: System Startup

202.1 Customising SysV-init system startup (weight: 3)

Weight	3
Description	Candidates should be able to query and modify the behaviour of system services at various run levels. A thorough understanding of the init structure and boot process is required. This objective includes interacting with run levels.

Key Knowledge Areas:

• Linux Standard Base Specification (LSB)

• SysV init environment

The following is a partial list of the used files, terms and utilities:

• /etc/inittab

• /etc/init.d/

• /etc/rc.d/

• chkconfig

• update-rc.d

• init and telinit

202.2 System recovery (weight: 4)

Weight	4
Description	Candidates should be able to properly manipulate a Linux system during both the boot process and during recovery mode. This objective includes using both the init utility and init-related kernel options. Candidates should be able to determine the cause of errors in loading and usage of bootloaders. GRUB version 2 and GRUB Legacy are the bootloaders of interest.

Key Knowledge Areas:

• GRUB version 2 and Legacy

• grub shell

• boot loader start and hand off to kernel

• kernel loading

• hardware initialisation and setup

• daemon/service initialisation and setup

• Know the different boot loader install locations on a hard disk or removable device

• Overwriting standard boot loader options and using boot loader shells

• Awareness of UEFI

The following is a partial list of the used files, terms and utilities:

• mount

• fsck

• inittab, telinit and init with SysV init

• The contents of /boot/ and /boot/grub/

• GRUB

• grub-install

• initrd, initramfs

• Master boot record

202.3 Alternate Bootloaders (weight: 2)

Weight	2
Description	Candidates should be aware of other bootloaders and their major features.

Key Knowledge Areas:

• LILO

• SYSLINUX, ISOLINUX, PXELINUX

• Understanding of PXE

The following is a partial list of the used files, terms and utilities:

• lilo, /etc/lilo.conf

• syslinux

• extlinux

• isolinux.bin

• isolinux.cfg

• pxelinux.0

• pxelinux.cfg/*

Topic 203: Filesystem and Devices

203.1 Operating the Linux filesystem (weight: 4)

Weight	4
Description	Candidates should be able to properly configure and navigate the standard Linux filesystem. This objective includes configuring and mounting various filesystem types.

Key Knowledge Areas:

• The concept of the fstab configuration

• Tools and utilities for handling SWAP partitions and files

• Use of UUIDs for identifying and mounting file systems

The following is a partial list of the used files, terms and utilities:

• /etc/fstab

• /etc/mtab

• /proc/mounts

• mount and umount

• blkid

• sync

• swapon

• swapoff

203.2 Maintaining a Linux filesystem (weight: 3)

Weight	3
Description	Candidates should be able to properly maintain a Linux filesystem using system utilities. This objective includes manipulating standard filesystems and monitoring SMART devices.

Key Knowledge Areas:

• Tools and utilities to manipulate and ext2, ext3 and ext4

• Tools and utilities to manipulate xfs

• Awareness of Btrfs

The following is a partial list of the used files, terms and utilities:

• fsck (fsck.*)

• mkfs (mkfs.*)

• dumpe2fs, xfsdump, xfsrestore

• debugfs

• tune2fs

• mkswap

• xfs_info, xfs_check and xfs_repair

• smartd, smartctl

203.3 Creating and configuring filesystem options (weight: 2)

Weight	2
Description	Candidates should be able to configure automount filesystems using AutoFS. This objective includes configuring automount for network and device filesystems. Also included is creating filesystems for devices such as CD-ROMs and a basic feature knowledge of encrypted filesystems.

Key Knowledge Areas:

• autofs configuration files

• UDF and ISO9660 tools and utilities

• awareness of CD-ROM filesystems (UDF, ISO9660, HFS)

• awareness of CD-ROM filesystem extensions (Joliet, Rock Ridge, El Torito)

• basic feature knowledge of encrypted filesystems

The following is a partial list of the used files, terms and utilities:

• /etc/auto.master

• /etc/auto.[dir]

• mkisofs

Topic 204: Advanced Storage Device Administration

204.1 Configuring RAID (weight: 3)

Weight	3
Description	Candidates should be able to configure and implement software RAID. This objective includes using and configuring RAID 0, 1 and 5.

Key Knowledge Areas:

• Software RAID configuration files and utilities

The following is a partial list of the used files, terms and utilities:

• mdadm.conf

• mdadm

• /proc/mdstat

• partition type 0xFD

204.2 Adjusting Storage Device Access (weight: 2)

Weight	2
Description	Candidates should be able to configure kernel options to support various drives. This objective includes software tools to view & modify hard disk settings including iSCSI devices.

Key Knowledge Areas:

• Tools and utilities to configure DMA for IDE devices including ATAPI and SATA

• Tools and utilities to manipulate or analyse system resources (e.g. interrupts)

• Awareness of sdparm command and its uses

• Tools and utilities for iSCSI

The following is a partial list of the used files, terms and utilities:

• hdparm, sdparm

• tune2fs

• sysctl

• /dev/hd*, /dev/sd*

• iscsiadm, scsi_id, iscsid and iscsid.conf

• WWID, WWN, LUN numbers

204.3 Logical Volume Manager (weight: 3)

Weight	3
Description	Candidates should be able to create and remove logical volumes, volume groups, and physical volumes. This objective includes snapshots and resizing logical volumes.

Key Knowledge Areas:

• Tools in the LVM suite

• Resizing, renaming, creating, and removing logical volumes, volume groups, and physical volumes

• Creating and maintaining snapshots

• Activating volume groups

The following is a partial list of the used files, terms and utilities:

• /sbin/pv*

• /sbin/lv*

• /sbin/vg*

• mount

• /dev/mapper/

Topic 205: Networking Configuration

205.1 Basic networking configuration (weight: 3)

Weight	3
Description	Candidates should be able to configure a network device to be able to connect to a local, wired or wireless, and a wide-area network. This objective includes being able to communicate between various subnets within a single network including both IPv4 and IPv6 networks.

Key Knowledge Areas:

• Utilities to configure and manipulate ethernet network interfaces

• Configuring basic access to wireless networks with iw, iwconfig and iwlist

The following is a partial list of the used files, terms and utilities:

• /sbin/route

• /sbin/ifconfig

• /sbin/ip

• /usr/sbin/arp

• /sbin/iwconfig

• /sbin/iwlist

205.2 Advanced Network Configuration (weight: 4)

Weight	4
Description	Candidates should be able to configure a network device to implement various network authentication schemes. This objective includes configuring a multi-homed network device and resolving communication problems.

Key Knowledge Areas:

• Utilities to manipulate routing tables

• Utilities to configure and manipulate ethernet network interfaces

• Utilities to analyse the status of the network devices

• Utilities to monitor and analyse the TCP/IP traffic

The following is a partial list of the used files, terms and utilities:

• /sbin/route

• /sbin/ifconfig

• /bin/netstat

• /bin/ping

• /usr/sbin/arp

• /usr/sbin/tcpdump

• /usr/sbin/lsof

• /usr/bin/nc

• /sbin/ip

• nmap

205.3 Troubleshooting network issues (weight: 4)

Weight	4
Description	Candidates should be able to identify and correct common network setup issues, to include knowledge of locations for basic configuration files and commands.

Key Knowledge Areas:

• Location and content of access restriction files

• Utilities to configure and manipulate ethernet network interfaces

• Utilities to manage routing tables

• Utilities to list network states.

• Utilities to gain information about the network configuration

• Methods of information about the recognised and used hardware devices

• System initialisation files and their contents (SysV init process)

• Awareness of NetworkManager and its impact on network configuration

The following is a partial list of the used files, terms and utilities:

• /sbin/ifconfig

• /sbin/route

• /bin/netstat

• /etc/network, /etc/sysconfig/network-scripts/

• System log files such as /var/log/syslog & /var/log/messages

• /bin/ping

• /etc/resolv.conf

• /etc/hosts

• /etc/hostname, /etc/HOSTNAME

• /bin/hostname

• /usr/sbin/traceroute

• /bin/dmesg

• /etc/hosts.allow, /etc/hosts.deny

Topic 206: System Maintenance

206.1 Make and install programs from source (weight: 2)

Weight	2
Description	Candidates should be able to build and install an executable program from source. This objective includes being able to unpack a file of sources.

Key Knowledge Areas:

• Unpack source code using common compression and archive utilities.

• Understand basics of invoking make to compile programs.

• Apply parameters to a configure script.

• Know where sources are stored by default.

The following is a partial list of the used files, terms and utilities:

• /usr/src/

• gunzip

• gzip

• bzip2

• tar

• configure

• make

• uname

• install

• patch

206.2 Backup operations (weight: 3)

Weight	3
Description	Candidates should be able to use system tools to back up important system data.

Key Knowledge Areas:

• Knowledge about directories that have to be include in backups

• Awareness of network backup solutions such as Amanda, Bacula and BackupPC

• Knowledge of the benefits and drawbacks of tapes, CDR, disk or other backup media

• Perform partial and manual backups.

• Verify the integrity of backup files.

• Partially or fully restore backups.

The following is a partial list of the used files, terms and utilities:

• /bin/sh

• dd

• tar

• /dev/st* and /dev/nst*

• mt

• rsync

206.3 Notify users on system-related issues (weight: 1)

Weight	1
Description	Candidates should be able to notify the users about current issues related to the system.

Key Knowledge Areas:

• Automate communication with users through logon messages.

• Inform active users of system maintenance

The following is a partial list of the used files, terms and utilities:

• /etc/issue

• /etc/issue.net

• /etc/motd

• wall

• /sbin/shutdown